 |
FAMEX-Ratchet
with 72 teeth
The 72-teeth spline allows the use in a 5° degree angle (72 positions per
360°).
This allows the use in very tight working conditions.
|
|
FAMEX-Ratchet
with 45 teeth
The 45-teeth spline allows the use in a 8° degree angle (45 positions per
360°).
This allows the use in tight working conditions.
|
|
Flexible-Ratchet
with 45 teeth
Ratchet-head allows the use in a +/- 90° angle (up/down) and can be fixed
at 5 positions.
The 45-teeth spline allows the use in a 8° degree angle (45 positions per
360°). For easy handling in tight working conditions.
|
|
Ratchet with quick release.
allows
a firm connection of socket and extension.
Single hand change of reversing lever.
|
|
Locking
Extension
The locking extension allows a firm connection of socket and extension.
Easy release by pulling the ring
|
|
|
2-Step-Wobble-Extensions
The spherical shaped square-drive of the wobble-extensions allow all tools
attached to be used up to an angle of 10°.
- easier to reach fasteners in tight conditions
- attached sockets and screwdriver-bits are placed
perfectly towards nuts and screws for maximum torque
- reduce stress on fasteners, sockets, screws and screwdriver-bits
compared to standard extensions
- longer tool live and prolonged performance
With tools full attached to use as standard extension for maximum torque.
With knurling for better handling
|
|
FSD-Super-Lock Sockets
are different from ordinary sockets.
The FSD-SuperLock-Socket removes the stress from the corner to the flat
section of the nut or bolt
- the contact area is increased
- no stress on the corners
- reduced stress on the nut or bolt
and reduced stress on the socket
- longer tool live and prolonged performance
Made of high carbon chrome-vanadium-steel, thoroughly hardened.
Chrome plated over nickel, double-finish
polished/matt,
knurled for better handling
|
|
Professional
double polished / matt dull finish, with knurling for better handling.
Sockets made of high carbon chrome-vanadium Steel 31CrV3, thoroughly
hardened, chrome-plated over nickel.
Bit-sockets
1/2"- and 1/4"-drive
bits made of special tough steel with chrome, silicon, manganese, molybdane
and vanadium.
Base made of chrome-vanadium-Steel 31CrV3, chrome-plated over nickel,
double-finish polished/matt, knurled
for better handling.
|
